Conveyor on the Fly Laser Marking Machine (OTFS)
The OTFS is designed for direct marking of moving parts on a conveyor. The systems allow to individually mark parts at a speed that can reach up to 10 m/s. The OTFS laser marking system was developed to engrave on the fly identifiers that may include logos, serial numbers, and date codes, either in Data Matrix Code or human-readable format.
Using an encoder signal, the laser machine can instantaneously compensate for various speeds and accelerations while maintaining a 100% laser safe work environment through a specially designed safety tunnel.
This laser machine is well-adapted in situations where:
- There is a continuous flow of products that require individual traceability
- Surface finishes vary within the marking field
- Production speed can vary
- The product to be marked may be contaminated with oils, dust, grease and other contaminants
- The system is required to be compliant with Class 1 laser safety standards
Advantages of Laserax’s Conveyor On The Fly Machine
- On The Fly Adaptation
The station can detect on the fly the moving parts and adapt to the positioning variation minimizing the need for mechanical alignment device of moving parts.
- No Impact on Production Process
The marking is performed on the fly at normal production speeds. It ensures that production yields will not be affected.
- Individual Branding
This station is perfect to add an aesthetic logo on every part resulting in high brand value and reducing counterfeiting.
- Class 1 Laser Safety Compliant
Your operators shouldn’t have to bear the burden of complex procedures to ensure their safety and the safety of other workers.
Laser Marking of Moving Foundry Ingots
With raising traceability standards comes the need to laser etch foundry ingots individually to avoid alloy mix-up.
Laser Marking of Moving Billets
With laser direct part marking you can individually manage the information engraved on the parts in real-time and on a part by part basis.