Laser Machine Options
Laser Configuration
With up to 500W of available laser power, our experts can adjust the marking speed as needed to fit your cycle time.
Autofocus System
To fix potential robot imprecisions, the 3D Autofocus system detects part positioning variations and uses that information to automatically adjust the marking process. This allows you to consistently generate high-contrast markings.
Automatic Drawer
Located outside the machine, the automatic drawer makes part loading easier for robots or operators by automatically moving parts inside the machine. With simplified machine access, you also gain in flexibility when optimizing your plant layout.
Gantry System
The fiber laser marker can be mounted on a gantry system to operate within a larger marking area and etch multiple parts during the same sequence.
HMI Control Panel
The standard HMI control panel provides direct access to laser marking parameters near the machine. You can:
- Manually adjust the laser marking zone, scale the identifiers, edit them and more
- Enter the manual operation mode to run tests or calibrate the laser
- Display information such as the system status, the operation mode and the alarm history
If you want to add custom features in the HMI, contact us.
Barcode Validation
Marking quality can be verified directly in the machine with our standard barcode validation system and precalibrated Cognex camera.
Custom Fixtures
The Laserax team can build custom fixtures to fix your parts into position.
Fixture Validation
Leave no room for operation mistakes that lead to incorrect serialization. Our fixture validation system can automatically read the fixture’s barcode and load its corresponding parameters. As a result, the right laser configuration and automation sequence are started every time.
For more machine options, contact a Laserax expert.
