Our LXQ lasers are ideal to create permanent identifiers on seat brackets. They etch permanent, high-quality identifiers that maintain traceability through e-coating and powder coating.
With laser cleaning, manual masking is a thing of the past. Instead, you can coat the entire part, then uncoat specific areas. This process leaves the substrate unharmed, maintaining the bracket’s integrity for other processes such as welding.
No need to deal with several suppliers and wonder who’s accountable for what. We provide all the features, peripherals and support needed to integrate the laser in your manufacturing process.
Operators never wait with this dual-position rotary table, as they can load a part while another one is marked.
The workstation can also be connected to your central server to streamline traceability operations.
The rotary workstation is robot ready and can be upgraded into a fully automated machine any time with minimal changes.
Replacing the operator with a robot arm, this alternative is the best way to integrate laser marking in robot cells without impacting cycle time.
No need to deal with several suppliers and wonder who’s accountable for what. We provide all the features, peripherals and support needed to integrate the laser in your manufacturing process.
With its fast cleaning speeds, this manually loaded workstation can be integrated inline to remove coatings without impacting cycle time & with minimal downtime.
It has a high-power laser and a dual-position rotary table.
We had this situation where we needed to read codes from our supplier and create a new code that included our production information and theirs. We tried labels for a while, but they kept falling off. Laser marking seemed like the obvious alternative.
Laserax had the vision and automation expertise we were looking for to automate the whole process with our central server. They helped us install a system that reads labels coming in from our supplier, communicates that information to our central server, then sends it to the laser to create the new permanent marks.
We used to have several full-time operators mask the welding areas before e-coating. This process was slow, prone to error, and expensive in terms of labor cost. Now, with a single operator at our laser cleaning station, we can process more parts per hour than before.
