Laser Machine Options
Laser Configuration
The machine is powered by a fiber laser whose power can range from 20W to 500W. A higher power increases the surface treatment speed, allowing you to meet more challenging cycle times.
We also offer two types of laser heads. 2D heads are typically used for surface treatments on flat surfaces. 3D heads can be used to treat any types of surface geometries, including curved ones, or to treat surfaces at different heights without moving the head.
Dynamic Autofocus
Our dynamic, on-the-fly autofocusing system automatically adjusts the laser configuration while the laser head is moved, for instance, on a gantry system. In doing so, it compensates for positioning imprecisions, resulting in an unmatched cleaning and texturing quality.
HMI Control Panel
The standard HMI control panel provides direct access to laser parameters near the machine. You can:
- Set laser parameters
- Enter the manual operation mode to run validation tests or calibrate the laser
- Display information such as the system status, the operation mode and the alarm history
If you want to add custom features in the HMI, contact us.
Cleaning Quality Validation
Multiple cameras positioned at various angles can validate cleaning results after each operation, making sure the surface is sufficiently cleaned based on your requirements.
Custom Fixtures
Our team can build custom fixtures to fix your parts onto the rotary table.
Fixture Validation
Leave no room for operation mistakes that lead to poor surface treatment performance. Our fixture validation system can automatically read the fixture’s barcode and load its corresponding parameters. As a result, the right laser configuration and automation sequence are started every time.
For more machine options, contact a Laserax expert.
